600-800BPH Two cavity semiautomatic bottle blow molding machine can produce two plastic bottle once. It is very mature PET bottle making machine. It is widely used to produce 100-2000ml carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle etc. Volume of product:0.1L-2L Production capacity:600-800 psc/hour Adopting double crank to adjust mould ,heavy locking mould, stable and fast ,Adopt infrared oven to heat the perform ,the perform rotated and heated equally.
| ITEM | MT-25 |
| Clamping force | 13T |
| Clamping stroke | 330mm |
| Max.stretching stroke | 440mm |
| Number of cavities | 0.1-3L 2cavity |
| Theoretical output | 0.5-2.5L:800-1500bph |
| Max.mould thickness | 280mm |
| Mould plate size | 490x470mm |
| Voltage standard | 380v/3PH/50Hzorspecoal order |
| Total power(full loaded) | 3-10KW 5-15KW |
| Min.air compressor | 1.2mm3/min3.0Mpa |
| Blow molding machine | 170*60*180cm |
| Pre - heater | 150x70x140cm |
| Net weight | 1T |
| Container volume | 3L |
| Neck diameter range | 28-100mm |
| Container diameter | 150mm |
| Container height | 450mm |
