Hydraulic system:Proportional Pressure Control,equipped with imported famous brand
hydraulic valve and pump,stable and reliable
Plsticization system:Efficient plasticizing mixing screw. Ensure plastic plasticizing
completely and evenly.
Speed regulating system:frequency control and hard alloy tooth surface reducer casing.
Smooth speed,energy saving,low noise and durable
Molding clamping sliding structure adopts linear guidr way. Accuracy up to micron level .The whole mold clamping combining a high position accuracy , easy and energy saving ,and strong bearing,immutability.Patented products:three rod,single cylinder two-way synchronous mold clampimg structure,stability is good.
Adopting the parison
programmer.reducing the differences on the width of the up and down due
to reducing material and vertical tensile,and improve the uniformity of
the wall thickness efficiently.
| TYPE | Unit | FMS-S60L |
| Max. Product Volume | L | 60 |
| Dry Cycle | Pc/H | 450 |
| Screw Diameter | MM | 90 |
| Screw L/D Ratio | L/D | 26:1 |
| Screw Heating Capacity | KW | 7-9 |
| Clamping Force | KN | 230-300 |
| Number of heating zone | Zone | 4 |
| Output of HDPE | Kg/Hr | 140-200 |
| Oil Pump Drive Power | KW | 30 |
| Mold Stroke | MM | 150-480 |
| Size of Mold | (W*H)MM | 700*900 |
| Max. Die pin Diameter | MM | 350 |
| Blowing Pressure | Mpa | 0.8 |
| Air Volume | M3/Min | 1.0 |
| Cooling Water Pressure | Mpa | 0.3 |
| Water Consumption | L/Min | 85 |
| Weight of Machine | T | 12 |
