ONE-STOP SERVICE
On the customer-centered principle, we devote ourselves providing high quality products and over-all service. We can help customers to set up complete production line.
SINGLE DIEHEAD AND MULTI-CAVITIES DIEHEAD
All single diehead and multi-cavities diehead have two types of center feeding and side feeding. The flow and pressure of every channel can be adjusted. All the diehead can work with MOOG parison control system to improve the product quality.
Suits for containers below 12L with PE/PP/EVA/ABS/BS/TPU/Nylon material.
1.Mould platens are controlled by 3 rods to increase clamping force
2.The screw is designed for plasticizing different materials such as PE/PP/PS/PA/PVC etc
3.Applying Frequency to adjust the speed of material plastification
4.Single station or double stations is optional according to customer’s demand
5.Horizontal platen movement, applying linear slider to improve stability and speed.
6.Clamping hydraulic cylinder Is located at the center of the platen to improve the uniformity force exertion
7.IML(in-mold-labling) is available to meet customer's demand
| Model No | Unit | FMS-S12L | FMS-2S12L | |
| Max.volume | L | 12 | 12 | |
| Dry cycle | pc/hr | 600 | 600*2 | |
| Screw Diameter | mm | 80 | 90 | |
| Screw L/D radio | L/D | 25 | 25 | |
| Screw motor power | Kw | 30 | 37 | |
| Screw heating power | Kw | 6.2~8.8 | 7.3~9 | |
| No.of heating zone | Zone | 4 | 4 | |
| Output of HDPE/HDPE | Kg/hr | 100~120 | 120~150 | |
| Oil pump drive power | Kw | 15 | 15 | |
| Clamping force | Kn | 110 | 110 | |
| Open stroke | mm | 180~600 | 180~600 | |
| Mold thickness(W*H) | mm | 500*510 | 500*510 | |
| Size of Mold | mm | 550 | 550 | |
| MaxMax.die diameter | mm | 220 | 220 | |
| Die heat capacity | Kw | 4.4~5.5 | 4.5~5.5 | |
| Blowing pressure | Mpa | 0.6~0.8 | 0.6~0.8 | |
| Air consumption | M3/Min | 0.6 | 0.8 | |
| Cooling water pressure | Mpa | 0.5 | 0.5 | |
| Water consumption | L/min | 60 | 70 | |
| Weigt | Ton | 7.8 | 11.2 | |
| Dimension (L*W*H) | M | 3.3*3.3*2.6 | 3.5*3.5*2.6 | |
